Publicité
Les langues disponibles
Les langues disponibles
following languages:
English, German, French, Dutch, Italian, Spanish,
Portuguese, Swedish, Danish, Polish, Norwegian,
Czech, Traditional Chinese for Taiwan, Korean,
Japanese.
▪ <Units>
You can choose between metric or imperial units
here.
▪ <Settings reset>
You can reset all of the system settings to the de-
fault values here.
– <Information>
You can find the following menu items here:
▪ <Contact>
You can find contact details for Bosch eBike Sys-
tems here.
▪ <Certificates>
You can find certificates and eLabels here.
Leaving the Settings Menu
Briefly press the button to save the settings and
leave the settings menu.
Press and hold the or button for more than one
second to leave the settings menu without saving the
settings.
Quick menu
Selected settings are displayed on the quick menu.
These settings can also be changed while riding.
You can access the quick menu by pressing and hold-
ing (> 1 s) the select button .
It cannot be accessed from the status page.
The following settings can be changed via the quick
menu:
– <Ride>
All data on the journey so far is reset to zero.
– <eShift> (optional)
The settings vary depending on the gearing in ques-
tion. For example, you can set your cadence here,
provided that the gearing supports this function.
– <Navigation> (optional)
You can select your recent destinations as a new
destination and/or end the running navigation.
Bosch eBike Systems
Note: Depending on the configuration of your eBike,
additional functions may be available.
Start page
If you did not select another page before the last time
you switched off, you will be shown this page.
80%
TURBO
21.4
(a) State of charge of eBike battery (can be config-
ured)
(b) Riding mode
(h) Unit of speed indicator
(i)
Your performance
(j)
Speed
(k) Drive power
You can view other screens by pressing the or
buttons.
The following additional screens are available for you
to view:
– Status screen: The status of the connected devices
is shown here.
– Distances screen
– Rides screen
– Range screen
– eBike battery screen
– Power screen
– Cadence screen
– Total distances screen
– ABS screen (optional)
<Display configuration>
You can find <Display configuration> in the eBike
Flow app, under <Settings> → <My eBike>. For
this, the eBike must be switched on and the smart-
phone connected.
You can personalize the display of your on-board
computer by going to <Display configuration>:
English – 11
(a)
(b)
(h)
km/h
(i)
(j)
(k)
0 275 U07 3RP | (03.05.2024)
Publicité
