Publicité
Les langues disponibles
Les langues disponibles
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flow app is re-
quired.
Connection to the app occurs via a Bluetooth® con-
nection.
Switch on the eBike and wait for the starting anima-
tion. Do not ride the eBike.
Begin Bluetooth® pairing by pressing and holding
(> 3 s) the on/off button (1). When the status of the
pairing process is displayed, release the on/off but-
ton (1).
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flow app.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
eBike Lock
<eBike Lock> can be set up for each eBike via
the eBike Flow app under <Settings> → <My
eBike> → <Lock & Alarm>. In the process, a key for
unlocking the eBike is saved on the smartphone and/
or the Kiox 300/Kiox 500 on-board computer.
The <eBike Lock> is automatically enabled in the fol-
lowing cases:
– The eBike is switched off via the operating unit
– The eBike is switched off automatically
If the eBike is switched on and the smartphone is con-
nected to the eBike via Bluetooth®, or the pre-set on-
board computer is fitted in the holder, the eBike will
be unlocked.
<eBike Lock> is connected to your user account.
Should you lose your smartphone, you can log in via
another smartphone using the eBike Flow app, and
unlock your user account and the eBike.
Bosch eBike Systems
Establishing a smartphone connection
If the on-board computer is lost, you can reset all digi-
tal keys in the <Lock & Alarm> menu item of
the eBike Flow app.
Warning! If you select a setting in the app that leads
to disadvantages for the <eBike Lock> (e.g. deletion
of your eBike or user account), then you will first be
shown warning messages. Please read through
these thoroughly and adhere to the warnings that
are issued (e.g. before deleting your eBike or user
account).
Setting up <eBike Lock>
In order to be able to set up the <eBike Lock>, the
following conditions must be fulfilled:
– The eBike Flow app has been installed.
– A user account has been created.
– No update is currently being carried out on the
eBike.
– The eBike is connected to the smartphone via
Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged, and the
charging cable is not connected.
You can set up <eBike Lock> in the eBike Flow app
under the <Lock & Alarm> menu item.
The eBike drive only provides support if, when the
eBike is switched on, the smartphone is connected to
the eBike via Bluetooth® or the on-board computer is
fitted in the holder. If the smartphone is used as a
key, your smartphone must have Bluetooth® switched
on, and the eBike Flow app must be active in the
background. If <eBike Lock> is activated, you can
also use your eBike without support from the drive
unit.
Compatibility
The <eBike Lock> is compatible with all Bosch drive
units from the system generation the smart system.
English – 15
0 275 U07 3RP | (03.05.2024)
Publicité
