Ravelli Efesto Manuel D'installation, D'entretien Et D'utilisation page 83

B
To reinsert the extracted components, perform
the same procedure in reverse order.
7.4.5 Replacing the ash grate
To replace the ash grate, proceed as described
below:
STEP ACTION
Tilt the ash grate, which is located
at the bottom of the combustion
1
chamber, grasp it by the handle
and pull it out by lifting it up
2 Replace with a new grate
C
D
B
7.4.6 Replacing the valve handle
To replace the valve handle, proceed as described
below:
STEP
Fig. 7.11
Fig. 7.12
Fig. 7.13
To reinsert the extracted components, perform
the same procedure in reverse order.
Fig. 7.14
ACTION
Unscrew the 2 screws of the front
1
panel (Fig. 7.15)
Unscrew the screw under the ash
2
guard (Fig 7.16)
3 Pull off the valve handle (Fig. 7.17)
ENGLISH
Fig. 7.15
Fig. 7.16
Fig. 7.17
83