Ravelli Efesto Manuel D'installation, D'entretien Et D'utilisation page 82

ENGLISH
7.4.3 Replacing the baffle
To replace the baffle, proceed as described below:
STEP ACTION
Remove the flame guard (see
1
previous paragraph)
Unscrew the upper screw holding
2
the baffle (Fig. 7.6)
To reinsert the extracted components, perform
the same procedure in reverse order.
7.4.4 Replacing plates
To replace the inner plates, proceed as described
below:
STEP ACTION
Remove the flame guard (see
1
previous paragraph)
Tilt the side plates using the
2 groove on the bottom. Tip: use a
screwdriver (Fig. 7.7)
Insert the new side plates (A) on
3 the side insulation panels (B) (Fig
7.8)
Release the back plate by
4
loosening the 2 screws (Fig. 7.9)
Tilt the back plate and pull it out of
5
the stove (Fig 7.10)
Remove the old cement (C) from
6
the groove (Fig. 7.11)
Pour new cement (D) into the
7
groove (Fig. 7.12)
Place the new back plate on the
8
rear insulation panels (B) (Fig. 7.13)
82
Fig. 7.6
Fig. 7.7
B
A
Fig. 7.8
Fig. 7.9
Fig. 7.10