Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
If the fitting to the flue pipe is horizontal, it is
necessary to not insert the last section of pipe
too far, to avoid throttling the smoke. Any free
thickness between the hole in the existing
chimney and the smoke duct pipe must be duly
sealed.
MIN 2 m
External air
intake
MIN 2 m
MAX 2 m min
External air
intake
74
Protection
from rain
Insulated flue
pipe
Insulated
condensate
T-fitting
3% slope
5.6 STANDARD INSTALLATION
The connections must be set up by a technician
that is qualified and/or authorised by the
Manufacturer.
For each type of installation, refer to the
regulations and laws in force in the region where
the product is installed.
STEP
1
2
3
Fig. 5.4
The tube (A) and gasket (B) shown are not
supplied with the appliance.
Fig. 5.5
ACTION
Drill two 7 mm holes in the flue pipe
(A) where the screws (C) are to be
housed
Insert the gasket (B) on the duct end
Insert the duct into the smoke outlet
and secure it with the two screws (C)
supplied in the bag of screws
A
B
C
Fig. 5.6
Publicité
