PARTS / FREQUENCY
Deep combustion chamber
cleaning
Door gasket
Flue pipe
Schedule the above extraordinary maintenance
activities with the Authorised Assistance Centre.
7.3.1 Checking the gaskets
When thoroughly cleaning the appliance, the
authorised technician must check that the
gaskets of the
• door
• ash drawer
• inspection hatches
are intact. If not, they will have to be replaced.
7.4 SUPPORT
Any unauthorised modification of the product is
prohibited.
Use only original spare parts.
These operations must be carried out by Ravelli
Authorised Assistance Centre personnel.
7.4.1 Internal cladding
4
1
Smoke baffle
2
Flame guard
Back plate
3
4
Side plates (2 pieces)
5
Grate for ash
1 SEASON
X
X
X
1
2
4
3
5
Fig. 7.3
7.4.2 Replacing the flame guard
To replace the flame guard, proceed as described
below:
STEP
ACTION
Open the combustion chamber
1
door
Pull the flame guard towards the
2
front of the stove (Fig. 7.4)
Remove the flame guard from the
3
rear (Fig 7.5)
To reinsert the extracted components, perform
the same procedure in reverse order.
ENGLISH
Fig. 7.4
Fig. 7.5
81