Ferroli FORCE W Serie Instructions D'utilisation, D'installation Et D'entretien page 204

When the day has been programmed, press the OK
button; the item "Save & exit" will be automatically se-
lected (fig. 24). Use the navigation buttons 5 and 7 to
change the previous settings, or press OK to confirm:
in this case the display will again show the day (fig. 16)
or the interval of days to be programmed (fig. 17). The
same procedure can therefore be followed to comple-
te the desired weekly program.
To program the next day in the same way, select "Copy to next day" and press OK to confirm (fig. 24).
To reset the time program to the default values, press the contextual button 3 in the Time Program menu
A
(fig. 25) and confirm with OK.
The two Heating and DHW time programs are independent even in case of resetting to default values.
A
204
Scheduler Set
1. 06:00 - 16:00
2. 16:00 - 21:00
--:-- - --:--
3.
4. --:-- - --:--
5. --:-- - --:--
--:-- - --:--
6.
Copy to the Next Day
Save & Exit
to confirm
fig. 22
Scheduler Set
1. 06:00 - 16:00
16:00 - 21:00
2.
21:00 - 06:00
3.
--:-- - --:--
4.
--:-- - --:--
5.
--:-- - --:--
6.
Copy to the Next Day
Save & Exit
to confirm
fig. 23
fig. 24
Scheduler Set
Monday
Tuesday
Wednesdey
Thursday
Friday
Saturday
Sunday
Monday-Sunday
to confirm
fig. 25
cod. 3541Q764 - Rev. 00 - 05/2021
FORCE W
Scheduler Set
1. 06:00 - 16:00
16:00 - 21:00
2.
21:00 - 06:00
3.
--:-- - --:--
4.
--:-- - --:--
5.
--:-- - --:--
6.
Copy to the Next Day
Save & Exit
to confirm
EN