Ferroli FORCE W Serie Instructions D'utilisation, D'installation Et D'entretien page 201

FORCE W
DHW temperature reduction adjustment (with optional hot water tank installed)
Access the menu "Adjustment Temp" to vary the temperature from a minimum of 10°C to a maximum of 65°C. Confirm
with the OK button.
The boiler is sold with time program not activated. Therefore, if requested, this is
B
the setpoint value.
DHW temperature reduction (with optional hot water tank installed)
Access the menu "Reduction Adjustment Temp" to vary the temperature from a minimum of 0°C to a maximum of
50°C. Confirm with the OK button.
This parameter is used only if time programming is activated. See *** 'Time programming' on page 202 ***
A
EN
CH setpoint
65
to confirm
fig. 14
DHW setpoint reduction
25
to confirm
fig. 15
cod. 3541Q764 - Rev. 00 - 05/2021
201