LIVARNO home LSLB 100 A2 Mode D'emploi Et Consignes De Sécurité page 9

WARNING! Never use optical instruments such as a
magnifying glass to look directly into the beam. This could
damage your eyes. If you suspect you have damaged your
eyes, seek medical attention.
CAUTION! Do not hang anything from the LED emitter (1).
The housing is not designed to support weights. This could
damage the LED emitter (1).
5. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for information
only. Copying data and information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams
are up-to-date as of the date of printing. Subject to change without notice.
6. Before you start
Remove the LED emitter (1) and fitting materials from the packaging.
Check the LED emitter (1) for damage. If the LED emitter (1) is damaged, do not use it.
If the delivery is damaged or incomplete, please contact the manufacturer's customer services.
6.1 Energy-efficient use
The LED emitter (1) offers various energy-efficient, power-saving options:
 Align the movement sensor (2) so that it only reacts within the required area. This reduces the number
of times the LED emitter (1) switches on.
 Use the SENS controller (5) to adjust the sensitivity of the movement sensor (2) so it is only just as
sensitive as you require. This reduces the number of times the LED emitter (1) switches on.
 Use the LUX controller (4) to adjust the lighting sensor so it only reacts at the level of darkness you
want. This prevents the LED emitter (1) switching on in brighter conditions and reduces the number it
times it switches on.
 Use the TIME controller (3) to adjust the light duration to no longer than required.
 Also make sure that there is nothing in the range of the movement sensor (2) which could trigger it
accidentally, e.g. tree branches or shrubs, traffic, pedestrians, etc. This reduces the number of times
the LED emitter (1) switches on.
The reference settings, such as light colour, colour temperature, brightness, beam angle and light spectrum
are hard-coded depending on the model and cannot be modified by the user.
LIVARNO HOME LSLB 100 A2
English - 7