Publicité
Les langues disponibles
Les langues disponibles
The device must be handed in at established
collection points, recycling centres or waste
management depots. The disposal of
defective devices which you have sent in will
be carried out free of charge. In addition,
distributors of electrical and electronic
equipment as well as food distributors are
obliged to accept returned waste. LIDL
provides you with return options directly in
its branches and shops. Return and disposal
is free of charge for you. When buying
a new device you have the right to return
an equivalent old device at no charge.
In addition you have the option, regardless
of whether you are buying a new device,
to hand in (up to three) old devices at no
charge, as long as the device is no larger
than 25 cm in any dimension. Before
returning the device please delete all
personal information. Before returning,
please remove batteries or rechargeable
battery packs which are not enclosed by the
old device, as well as bulbs, which can be
removed without destroying the product and
take these to a separate collection point.
Batteries containing harmful
substances are labelled with the
adjacent symbol, which indicates the
prohibition on disposal in household waste.
The abbreviations for the relevant heavy
metals are: Cd = Cadmium, Hg = Mercury,
Pb = Lead Take used batteries to a waste
management company in your city or
community or return them to your dealer.
This satisfies your legal obligations while
also making an important contribution to
protecting the environment.
Please note the marking on the
different packaging materials and
separate them as necessary.
The packaging materials are marked with
abbreviations (a) and digits (b) with the
following definitions: 1–7: Plastics,
20–22: Paper and cardboard, 80–98:
Composite materials.
• EC Declaration of
Conformity
We,
C. M. C. GmbH Holding
Responsible for documentation:
Dr. Christian Weyler
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
hereby take sole responsibility for declaring
that the product
Plasma cutter PPS 40 C3
IAN: 435169_2304
Year of manufacture: 03/24
Art. no.: 2628
Model: PPS 40 C3
meets the basic safety requirements as
specified in the European Directives
EC Guideline on Electromagnetic
Compatibility
2014 / 30 / EU
RoHS Directive
2011 / 65 / EU
EC low-voltage directive
2014/35/EU
and the amendments to these Directives.
The manufacturer will be solely responsible
for the creation of the declaration of
conformity.
The object of the declaration described
above meets the requirements of Directive
2011/65/EU of the European Parliament
and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous
substances in electrical and electronic
equipment.
This conformity assessment is based on the
following harmonised standards:
GB/IE/NI/CY/MT
21
Publicité
