Parkside PSTDA 20-Li C3 Traduction Des Instructions D'origine page 25

Proper use
This device is only intended for the follow-
ing uses:
• Sawing plastic, wood and light metal
with firm support
• Sawing straight and curved cuts as well
as mitre cuts (only wood and plastic) of
up to 45°
• Only operate in dry areas.
Please note the information on saw blade
types.
Any other use that is not expressly permit-
ted in this instruction manual may pose
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 20 V TEAM
series and can be operated with bat-
teries of the X 20 V TEAM series. Bat-
teries of the X 20 V TEAM series may
only be charged using chargers of the
X 20 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Jigsaw
• 2 × Wood saw blade (Swiss made)
• 1 Metal saw blade (Swiss made)
• Parallel guide
• Slide shoe (pre-assembled)
• Splinter guard (pre-assembled)
• Guard cover (pre-assembled)
• Line guide adaptor (pre-assembled)
• Reducer piece (pre-assembled)
• Storage case
• Translation of the original instructions
The rechargeable battery and
charger are not included in deliv-
ery.
Overview
The illustrations for the
device can be found on
the front and back fold-out
page.
1 Switch lock
2 On/Off switch
3 Handle (Insulated gripping surface)
4 Battery holder
5 Suction nozzle
6 Reducer piece
7 Notch
8 Slide shoe
9 Switch (dust blower function)
10 Hexagon socket screw (not visible)
11 Footplate
12 Pendulum stroke switch
13 Chuck
14 Guide roller
15 Parallel guide
16 Wood saw blade
17 Metal saw blade
18 Mount (Parallel guide)
19 Line guide adaptor
20 Retaining screw
21 Guard cover
22 LED work light
23 Release (Chuck)
24 Recess in slide shoe
GB MT
25