Télécharger Imprimer la page

Parkside Performance PABSP 20 LI C3 Instructions D'utilisation Et Consignes De Sécurité page 35

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
Rapid battery charger PLG 20 C3 *
Input:
Rated voltage:
Rated frequency:
Rated power:
Fuse (internal):
Output:
Rated voltage:
Charging current:
Protection class:
* Battery and rapid battery charger are not
included
Charging time:
Battery pack type PAP 20 B1, 2.0 Ah
 
(available separately): 35 minutes
Battery pack type PAP 20 B3, PAPS 204 A1,
 
4.0 Ah (available separately): 60 minutes
Battery pack type PAPS 208 A1, 8.0 Ah
 
(available separately): 120 minutes
Recommended ambient temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values have been determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
pA
Uncertainty K
:
pA
Sound power level L
:
WA
Uncertainty K
:
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Drilling into metal:
Hand/arm vibration a
h,D
Uncertainty K:
34 GB/IE
230–240 V
~
50 Hz
120 W
3.15 A/
21.5 V
4.5 A
II/
+4 to +40 °C
+4 to +40 °C
+20 to +26 °C
:
81.9 dB(A)
5 dB
92.9 dB(A)
5 dB
:
< 2.5 m/s
2
(1.094 m/s
)
2
1.5 m/s
2
m
WARNING!
Wear ear protection!
NOTE
The declared vibration total value and
u
the declared noise emission value have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration value and the
u
declared noise emission value may also
be used for a preliminary assessment of
exposure.
WARNING!
m
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).
˜ Trademark notices
iOS and Apple are registered trademarks of
o
Apple Inc. in the USA and other countries.
App Store is a registered trademark of
Apple Inc.
Android, Gmail, Google Play and
o
Google Assistant* are registered trademarks
of Google Inc.
Zigbee is a registered trademark of
o
The Zigbee Alliance.

Publicité

loading

Ce manuel est également adapté pour:

Hg09587