Denver E-3400RM Manuel De L'utilisateur page 7

First use and adjustments
Positioning of the safety elements
Lighting
Lighting is provided with the bicycle, consisting of two reflectors (one white included in the front
light and one red in the rear light), one front light, one rear light and two other orange reflectors
positioned between the spokes of the wheels.
The lighting system is an obligatory safety feature of your bicycle, as such it must be present. Check
that your lighting system works before riding.
If necessary, you can change the bulb or the batteries of your lighting.
Headlight with external battery
Remove the top transparent portion of the headlight by pressing on the notch located behind the
case. Once removed, you can remove both button batteries and replace them with the correct
polarity. Replace the transparent part. Turn the front light on / off by moving the small switch on
the top of the lamp.
Tail light with external battery
Remove the transparent part with a screwdriver. Once removed, you can remove both batteries and
replace them with the correct polarity. Replace the transparent part. You turn the tail light on and
off by moving the small switch on the back of the lamp.
Bell
A bell is situated on your handlebars. It can be heard in a range of 50 m.
The bell is an obligatory safety feature of your bicycle, as such it must be present on your handlebars.
Wearing a helmet
For a safe use, wearing a bicycle helmet is strongly recommended. It reduces the risk of skull injuries
in the case of falls.
7/112