Publicité
Les langues disponibles
Les langues disponibles
Cleaning
In order to avoid corrosion on the bicycle, it should be rinsed in fresh water after every use,
especially if it has been exposed to sea air.
It should be cleaned with a sponge, a bowl of warm soapy water and a hosepipe (without pressure).
RECOMMENDATION: Be particularly careful to not use a pressurised water jet.
Lubrification
Lubrification is essential for the various components that move, in order to avoid corrosion.
Regularly grease the chain, brush the sprockets and chain rings and trickle a few drops of lubricant
into the brake and derailleur cable sheaths.
We recommend starting by cleaning and drying the components to be greased.
Specific lubricant is recommended for the chain and derailleur. Grease can be used for the other
components.
16/112
Publicité
