Software Updates; Updating The Software - digades DGUARD Mode D'emploi

SOFTWARE UPDATES

5 Software updates

5.1 Updating the software

Software updates allow you to benefit from product improvements at all
times and make sure that your dguard
EN
1. Switch on your motorbike's ignition.
2. Ensure that you are in a location with sufficient mobile phone reception.
3. Open the dguard
Ö The dguard
update.
4. Click on "Yes" on the notification of a software update in order to
install an available software update.
Ö The update process is started. The software update is downloaded
and installed in the background. The LED on the dguard
a modulating manner.
Ö If you have started the software update with your smartphone, you
will receive a message via the dguard
successful.
Ö If you have started the software update with the web app, e.g. using
your notebook, you will receive an e-mail.
Ö If the software update fails, you will receive a message via the dguard
app or an e-mail. If the problem continues to persist, contact us or
your certified dguard
5. To carry out the software update later, click on "No".
Ö Later, when you select the motorbike, you will be reminded of the soft-
ware update. Alternatively you can use "My dguard
a software update. If a software update is available, the button "New
update available" appears.
36
INFO
Your motorbike's ignition must be active during the entire
update process. If your motorbike has a keyless-go system
that switches the ignition off again after certain amount
of time, let the engine run during the update. A loss of the
power supply during the software update can lead to total
failure of the dguard
the user. A software update takes approx. 10 minutes.
app.
®
app tells you automatically about an available software
®
dealer.
®
system is always up to date.
®
system, which cannot be remedied by
®
app if the process has been
®
is lit up in
®
system" to start
®
®