Setting A Break Time; Finishing The Tour - digades DGUARD Mode D'emploi

4.6.2

Setting a break time

The break time allows you to interrupt the recording of a tour.
• If the interruption is longer than the set break time, the recording must
be started again.
• If the interruption is shorter, the tour is automatically resumed once
you start riding again.
1. Open the dguard
2. Open the menu in the top right corner of the screen and select "Set
break time".
Alternatively: Navigate to "My dguard
roadbook with break time".
3. Select a timeframe and click on "Finished".
Ö The break time is activated when you switch off the ignition during
recording of a tour.
4.6.3

Finishing the tour

Option 1: Finishing the tour manually
1. Click on "Finish" in the recording bar within the dguard
Ö The tour is finished and stored. You can view the tour data under
"dguard roadbook".
®
Option 2: Tour is finished automatically
The recording is finished if your dguard
the set break time. The tour is stored. You can view the tour data under
"dguard roadbook".
®
1. If you ride off again before the break time is over, the recording of
the tour is resumed automatically.
OPERATING THE dguard
app and click on "dguard
®
roadbook".
®
system" and click on "dguard
®
system is inactive for longer than
®
SYSTEM
®
®
app.
®
33
EN