digades DGUARD Mode D'emploi page 19

INSTALLING THE dguard
2. Ensure that the adhesive surface of the adhesive pad
of impurities.
3. Stick the adhesive pad
EN
dguard
!
4. Press the dguard
entire surface of the adhesive pad..
!
5. Attach the dguard
adhesive tape or cable ties.
Ö You have now installed the dguard
18
®
INSTRUCTION
The adhesive surfaces of the adhesive pad
be dry and free of dust and grease. Clean the adhesive
surfaces thoroughly before sticking.
(Fig. 4/1)
module.
®
WARNING!
Note the slot for the pressure compensation membrane
(Fig. 4/4)
on the adhesive pad for the dguard
Do not stick anything on the pressure compensation
membrane.
module to the adhesive surface. Try to use the
®
WARNUNG!
To guarantee full functionality in the event of an accident
and to avoid false alarms, ensure that the dguard
ule is securely positioned after installation.
module to a fixed part of your motorbike using
®
SYSTEM
to the selected location for the
module.
®
(Fig. 4/1)
must
(Fig. 4/1)
is free
module.
®
mod-
®