Installing The Gps Antenna - digades DGUARD Mode D'emploi

INSTALLING THE dguard

3.3 Installing the GPS antenna

Observe the following requirements at the installation location:
• Select a location on your motorbike with sufficient space for the adhe-
sive pad
• Ensure that no metal parts of the frame and no top case interfere with
reception. Plastic frame parts do not interfere with reception.
EN
1. Place the GPS antenna
Fig. 7: Example installation location for the GPS antenna
2. Ensura that the antenna cable reaches the antenna connection of the
dguard
3. Connect the GPS antenna to the antenna connection of the dguard
module.
16
®
(Fig. 4/2).
INFO
To test the reception of the GPS antenna, you have now
connected the cable harness to the vehicle battery and to
the positive terminal of the power circuit activated by the
ignition ("terminal 15").
(Fig. 7/1)
module.
®
SYSTEM
at the planned installation location.
®