Testing Bluetooth Reception; My Dguard ® Account - digades DGUARD Mode D'emploi

4.7.2

Testing Bluetooth reception

Observe the following requirement:
• Your Bluetooth headset is connected
tooth headset to the dguard
1. Switch on your motorbike's ignition.
Ö The LED on the dguard
switched on. When the LED on the dguard
nently, the system is active.
2. Navigate to "My dguard
3. Put on your headset.
4. Click on "Test headset connection".
Ö Through the headset, you will hear the automatic voice message that
is sent to the emergency services in the event of an emergency call.
Ö If the status display under the button lights up in green, the test was
successful. If the status display lights up in red, the connection has
been terminated. If the status display remains grey, no current con-
nection status is available.
4.8 My dguard
1. Navigate to "My dguard
Ö The account settings are opened.
2. Carry out the following tasks if necessary:
• Manage the motorbikes you have created in the dguard
(edit name, make and model; delete motorbike profile).
• Change the phone number for the anti-theft warning.
• Manage your account (change password and e-mail address;
delete account).
• Log out of the dguard
OPERATING THE dguard
system",
®
button flashes slowly and the system is
®
system".
®
account
®
account".
®
app.
®
(Chapter "3.7 Connecting a Blue-
p. 20).
button lights up perma-
®
SYSTEM
®
app
®
35
EN