Ingeteam SMART DLM Manuel D'installation Et Configuration page 8

Ingeteam
3 SMART DLM
3.1 Introduction
The SMART DLM energy manager comprises a set of software and hardware elements that work
together to correctly perform the pre-defined functionality.
3.1.1 Software
The SMART DLM control software is supplied as standard with all the compatible equipment:
- FUSION
- RAPID 50
- RAPID 60
- RAPID 180
- RAPID ST
3.1.2 Hardware - SMART DLM Kit
The SMART DLM kit is always three-phase. There are three different versions, depending on the
installation power at the meter point and the charging point with which communication is to be
established.
Smart DLM: up to 65 amps per phase (15 kW @ 230Vac)
-
Smart DLM Pro: more than 65 amps per phase for FUSION. (metering transformers not
-
included).
Smart DLM Pro RAPID: more than 65 amps per phase for RAPID. (metering transformers not
-
included).
3.2 Installation standard SMART DLM
The set of components forming part of a SMART DLM installation are listed below:
- External wattmeter
- RS485 bus
- Ingeteam charging point
8
SMART DLM
ABW2012IQM01_E.docx