Publicité
Les langues disponibles
Les langues disponibles
Ingeteam
4.3.2
EM24
Configuration of the wattmeter for the correct operation of the SMART DLM.
1. Supply power to the Wattmeter from the
electrical grid.
2. Turn the switch to position 1.
3. Access the configuration menu by pressing
the joystick for 3 seconds. An access code
will be requested. This code is 0, by default.
Once you have entered the code, press the
joystick once to accept.
4. This gives you access to the password
configuration screen CNG PASS. We
would advise you not to change the
password and to move the joystick to the
right to go to the next screen.
5. APPLICAT application type screen. In this
screen, you need to select application type
H. To do so, press the joystick once.
PRG will appear at the bottom of the
display, indicating that it is possible to
change the value.
Move the joystick in any of the 4 directions
until TYP.H appears. Press the joystick
once to accept
20
SMART DLM
ABW2012IQM01_E.docx
Publicité
