Publicité
Les langues disponibles
Les langues disponibles
SMART DLM
5. At MEASURE, select type B. Press the right ENTER
button to accept
6. Scroll to RS485 with the UP / DOWN buttons and press
the right ENTER button again. In ADDRESS, select the
node number of the wattmeter. This number must match
the one indicated in the charging point it will comunicate
with.This number can be modified through the
Webmanager. For futher information, please refer to the
charging point configuration manual. By default select
node number 1. Press the right ENTER button to accept.
7. In BAUDRATE, select the number 9.6. Press the right
ENTER button to accept.
8. Scroll to the END screen. Press the right ENTER button
to return to the start screen.
ABW2012IQM01_E.docx
Ingeteam
EN
ES
FR
IT
19
Publicité
