Ingeteam SMART DLM Manuel D'installation Et Configuration page 23

SMART DLM
5 Ingeteam charging point
5.1 FUSION
5.1.1 Description
To establish communication between the external wattmeter and the FUSION charging points, you
need to add an RS485 board, which connects to the control board located on the charging point door.
This RS485 board is included in the SMART DLM kit for FUSION.
The main elements of the RS485 board are:
- Connector for RS485 wiring
- Micro-switch
- Connectors to insert in the control board.
ABW2012IQM01_E.docx
RS485 Board.
Ingeteam
EN
ES
FR
IT
23