Güde KS 400-53 V Traduction Du Mode D'emploi D'origine page 33

Technical Data
Chain saw
Art. No
Contents
Max. Power 2-stroke motor
Idle speed
Chain speed
tank capacity
Oil mixing ratio for 2-stroke motors: fuel
Chain oil tank
Saw bar Type (Kangxin)
Cutting length*
Bar length
Saw chain Type (Kangxin)
Segment / Guiding footing thickness
Number of guiding footings
Chain saw wheel:
Weight (net) without bar, chain and empty tank
Noise details
Sound pressure level L
1)
pA
Measured sound power level L
Guaranteed sound power level L
Wear ear protectors!
Vibration details
Vibration emission value a
Front handle
Rear handle
* without claw
At work place, Measured according to ISO 22868, Uncertainty K=3 dB (A),
1)
Measured according to 2000/14/EC, 2005/88/EC
2)
Measured according to EN ISO 22867, Uncertainty K=1,5 m/s
3)
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
1)
WA
2)
WA
3)
h
2
ENGLISH
29
KS 400-53 V
05369
53cm
3
2,0 kW (2,72 PS)
3100 (±300) min
-1
21 m/s
0,55 l
1:40
0,26 l
AP16-57-507P
16", ca. 400 mm
ca. 460 mm
3/8LP-57
3/8" / 1,27 mm
57
7T x 3/8"
5.1 kg
99 dB (A)
110 dB (A)
114 dB (A)
7,07 m/s
2
6,67 m/s
2