VELTIUM LITE Zero Guide De L'utilisateur page 58

7. MANAGING THE CHARGER
FROM THE VELTIUM APP
7.4 LOGS
Consult all of the information on charges made in bar chart or list form. To change from one
viewing mode to the other, press the See listing and See chart one after the other.
1. BAR CHART SHOWING INFORMATION FOR A PERIOD
2. LIST SHOWING INFORMATION FOR A PERIOD
The list of charges made includes a log of every charge with the following information:
· Charge start date and time.
· Charge end date and time.
· Energy consumed by the vehicle while charging (in kWh).
· The user who made the charge.
If the Lock control is in
associated with any user.
If the Lock control is set to
be associated with the user who unlocked the charger and performed the
charging.
Remember that the information on charges won't appear in the App until they
have been completed, and this happens when the car is unplugged from the
charger. The start and end times of a charging process are the times when the
vehicle is connected to and disconnected from the charger.
Additionally, by tapping on a specific charging session, you can visually see its
consumption in kWh per every 15 minutes, as well as the user who performed the
charge.
Period of time and accumulated consumption in kWh. Scroll
sideways for earlier or later periods.
Bar chart showing consumption for a specific period
broken down into: months representing the year, days
representing the month or week, and hours representing
the day. Average consumption for the period is also
displayed.
Select the period of time for which you want to see the
information in bar chart format.
Free mode, the charging sessions will NOT be
Proximity or Manual, the charging sessions will
58