VELTIUM LITE Zero Guide De L'utilisateur page 49

7. MANAGING THE CHARGER
FROM THE VELTIUM APP
If you have selected NO
in Photovoltaic generation
5- Measuring device
Select CURVE or Meter, depending
on what you have installed.
6- Location of the measuring device
House circuit
Select the House circuit
the measuring device is installed in
a circuit that solely measures home
consumption and does not include
the charger's consumption.
General circuit
Select the General circuit
the measuring device is installed
in a circuit that measures total
consumption of both your home and
the charger.
option when
when
If you have selected YES
in Photovoltaic generation
5- Measuring device
The default setting is the
option.
6- Location of the measuring device
The default setting is the
circuit option.
7- Mode
Select one of the two integration
alternatives:
Mixed mode
The energy for charging comes from
both solar generation and the grid.
The charge can be programmed:
• During the scheduled hours, the
charger adjusts the vehicle's charging
power to not exceed the contracted
power.
• Outside the scheduled hours, the
charger adjusts the vehicle's charging
power to actual solar generation and
acts as Solar Mode (see below).
Solar Mode
The charging power is exclusively
generated from solar energy. The
charger adjusts the vehicle's charging
power to actual solar generation.
Choosing this option means that the
charging cannot be programmed.
49
Meter
General