Viewing The Surrounding Environment - Sony Glasstron PLM-S700 Mode D'emploi

Viewing the surrounding environment

While you are wearing the Glasstron, you can view the surrounding environment through the
screen in two ways:
Viewing the surrounding
environment by adjusting the
transparency of the entire
screen (See-through mode)
You can adjust the level of transparency of
the entire screen with the LCD shutter dial.
The picture becomes
transparent.
Turn the SEE-THROUGH dial.
Note
If there is a bright light near the display unit,
you may not be able to completely black out
the surrounding environment by adjusting the
SEE-THROUGH dial.
34
-US
The area surrounding
the picture also becomes
transparent.
SEE - THROUGH
CLOSE OPEN
Viewing the surrounding
environment in the area
around the picture only
(Screen mode)
You can adjust the level of transparency of
the screen area around the picture only. The
picture remains intact.
The picture remains
intact.
Set the SCREEN switch to
ON.
In this mode, the screen does not
become transparent even if you turn
the SEE-THROUGH dial.
Notes
• When you set the SCREEN switch to ON, the
edges of the picture may fade a bit, but this is
not a malfunction.
• If there is a bright light near the display unit,
you may not be able to completely black out
the surrounding environment arround the
picture by adjusting the SEE-THROUGH dial
when you set the SCREEN switch to on.
The area surrounding
the picture also becomes
transparent.
SCREEN
ON OFF