Connecting the Glasstron (continued)
Connecting a Macintosh Powerbook
Depending on the model, you may need to use a commercially available adapter to connect the
RGB signal cable (supplied) as shown below. When you connect the Glasstron to your
Powerbook, set the PC-VIDEO switch on the power supply box to "PC."
to monitor
?
port of
Powerbook
to monitor port
Adapter
Note on connection
Set the display setting to the 16-inch display mode (832 × 624) or the 13-inch display mode (640 × 480).
The Glasstron does not display the image with the 19-inch display mode (1024 × 768) or more.
16
-US
Connector should match the monitor
port of your Powerbook model.
to audio port
Audio cable (supplied)
RGB signal cable (supplied)
: Signal flow
Set the PC-VIDEO switch
to "PC."
PC
AUDIO
to PC AUDIO
connector
to RGB
/
signal cable
VGA type connector
(HD15, female)
Power supply box
RGB
to RGB connector