Sony Glasstron PLM-S700 Mode D'emploi page 17

Connecting a Macintosh (desktop models)
Depending on the model, you may need to use the supplied Macintosh adapter to connect the
RGB signal cable (supplied) as shown below. When you connect the Glasstron to your
Macintosh, set the PC-VIDEO switch on the power supply box to "PC."
to monitor port
?
of Macintosh
(D-Sub 15-pin,
male)
to monitor port
Macintosh
adapter
Notes on connection
• The supplied display adapter does not support the models before the Macintosh II series.
• Set the display setting to the 16-inch display mode (832 × 624) or the 13-inch display mode (640 ×
480). The Glasstron does not display the image with the 19-inch display mode (1024 × 768) or more.
to monitor
port
Set the PC-VIDEO switch
to "PC."
to audio port
Audio cable (supplied)
RGB signal cable (supplied)
: Signal flow
/
VGA type connector
(HD15, female)
Power supply box
PC RGB
AUDIO
to PC AUDIO
to RGB connector
connector
to RGB signal cable
continued
17
-US