Stosa Lumia Utilisation Et Entretien page 36

Use & Maintenance
FEATURES
Material
Door th. 18 mm, made with wood particle board panel with melamine
paper laminate facing with a thickness of 0.3 mm on 2 sides, applied with
a melamine press without the use of glue, using the heat reaction of the
resins in the paper itself. Exterior and interior decorative veneer with
smooth matt melamine finish. Edges on 4 sides in ABS with a thickness of
10/10, applied with hot melt glue.
Door th. 18 mm, made with wood particle board panel with melamine
paper laminate facing with a thickness of 0.3 mm on 2 sides, applied
with a melamine press without the use of glue, using the heat reaction
of the resins in the paper itself. Thermo-structured melamine exterior
and interior decorative finish. Edges on 4 sides in ABS with a thickness of
10/10, applied with hot melt glue.
Door th. 18 mm, made with wood particle board panel with melamine
paper laminate facing with a thickness of 0.3 mm on 2 sides, applied with
a melamine press without the use of glue, using the heat reaction of the
resins in the paper itself. Thermo-structured textured melamine exterior
and interior decorative finish. Edges on 4 sides in ABS with a thickness of
10/10, applied with hot melt glue.
Door th. 18 mm, made with wood particle board panel with melamine
paper laminate facing with a thickness of 0.3 mm on 2 sides, applied with
a melamine press without the use of glue, using the heat reaction of the
resins in the paper itself. Thermo-structured textured melamine exterior
and interior decorative finish. Edges on 4 sides in ABS with a thickness of
10/10, applied with hot melt glue.
36