A&D Medical UA-1030TCN Manuel D'instructions page 12

Using the Monitor
Adjusting the Clock
The UA-1030TCN blood pressure monitor has a built-in clock that gives you
the time and date and can tell you when a blood pressure reading stored in
memory was taken. We recommend that you adjust the clock prior to use.
To adjust the clock, follow these simple steps:
1. Press the set button
right of the display.
2. Use the arrow
3. After reaching the desired year, press the
set button
4. Repeat the process for the month, day
and hour.
5. The next setting will be for pressure.
Adjusting the Pressure
1. After setting the year, month, day and hour, the next mode is the pressure
setting.
2. Default is
3. For even more rapid readings, you can adjust the default to about
30 mmHg or more above your expected systolic pressure.
4. Use the arrow
5. After reaching the desired pressure, press the set button
6. The next setting will be for TriCheck™ Mode.
E-12
located to the
buttons to set the year.
again.
, which stands for automatic.
buttons to set the pressure.
Set Button
again.