A&D Medical UA-1030TCN Manuel D'instructions page 21

About Memory
Note: This device stores the last 90 measurements in memory. The device announces the memory
data values as they are displayed.
1. Press the
all measurements and the number of data
are displayed. (If no data, "0" is displayed.
Press the
the device off.)
2. Each time the
to display the data in the reverse order) is
pressed, the memory data is displayed as
follows.
Average of all AM (morning)
measurements taken between 4:00 and
9:59. (In the example, 10 measurements.
If no data, "--" is displayed.)
Average of all PM (evening)
measurements taken between 18:00 and
1:59. (In the example, 9 measurements. If
no data, "--" is displayed.)
Most recent data (See No. 35). Three
seconds after the data number display,
the measurement data is displayed.
Last data (No.1). Three seconds after the data number display, the
measurement data is displayed.
3. After the last data is displayed, press the
display of all measurements.
4. Press the START button to turn the device off. After one minute of
non-operation, the device will turn off automatically.
or button. The average of
, or START button to turn
button (or the
Press
button
button to return the average
or
Average systolic
Average diastolic
Average pulse
Average of
all the data
Average systolic
Average diastolic
Average pulse
Average
of AM data
Average systolic
Average diastolic
Average pulse
Average
of PM data
Most recent data
Last data (Oldest)
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
E-21