Publicité
Fanfold
Papier continu
Endlospapier
Carta in modulo continuo
Cut-sheet
Feuilles séparées
Einzelblatt
Carta in fogli
117
Release lever
Levier de dégagement
Freigabehebel
Leva di rilascio
7
5
3
1
Scale
Paper guide
Echelle
Guide-papier
Skala
Papierführung
Scala
Guida della carta
Manual sheet feeding
You can use the following procedure to manually
feed cut-sheet paper into the printer.
Make sure that there is no fanfold paper in the
printer. If there is, use the procedure under
"Parking fanfold paper" on page 19 to park the
fanfold paper and prepare for manual sheet
feeding.
Set the release lever on the back of the printer to
the cut-sheet position.
Set the adjustment lever to the value that matches
the thickness of the paper you are using. The
setting for normal paper is 1. Set the lever to a
larger value for thicker paper, or to a smaller
value for thinner paper.
Adjust the paper guide to the position you want.
Note that the
mark of the guide indicates
where the left margin of the printing will be.
Publicité
