SATA SATAjet 3000 K Mode D'emploi page 33

Operating Instructions SATAjet 3000 K spray mix
10. Spare parts
Part. no. Description
12260 Pack of 4 sieves 60 msh for SATA strainer
12278 Pack of 4 sieves 100 msh for SATA strainer
17152 Pack of 12 air piston springs
18341 Pressure spring for paint needle
30833 Nozzle cleaning kit
74856 Kit of SATA sieves 200 msh, consisting of 4 sieves 20933,
2 strainer holder 77503 and 1 screw 26393
94961 Air micrometer, cpl.
97824 Pack of 3 air distribution rings
98418 Closing screw
98434 Pre-nozzle, cpl.
98459 Air cap, cpl. round/fl at fan
98525 Seal retainer, cpl.
98590 Material connection
98608 Paint tube, cpl, with strainer 100 msh
98665 Air cap ring, cpl.
98681 Trigger kit, cpl.
98699 Tool kit
98707 Repair kit SATAjet 3000 K spray mix
98764 Nozzle set consisting of pre-nozzle and needle tip
98772 Paint needle, cpl. consisting of paint needle and needle tip
98806 Round/fl at spray control, cpl.
120071 Trigger block set, cpl.
120261 Sealing unit inversion switch
120279 Add-on kit inversion unit inversion switch
133926 Trigger sleeve kit
133942 Seal retainer, cpl.
133967 Threaded pin
133991 Pack of 3 air piston heads
134098 Air connection piece
Contained as spare part in repair kit 98707
** Available in servicing units
•
Contained as spare part in air piston servicing unit 92759
The spare part drawings and the accessories can be founf on the fold-out page
at the end of this booklet.
IX.9