Tineco FLOOR ONE S6 Serie Mode D'emploi page 25

9 WiFi/Mute/Language Switch Button
10 Clean Water Tank (CWT)
11 Brush Roller Cover
12 Brush Roller
13 Deodorizing & Cleaning Solution
14 Cleaning Tool
15 Dry Filter & Holder
16 Accessory Holder
17 Adaptor
18 Charging Dock
19 WiFi Indicator
20 DWT Full or Blocked
Dirt Monitoring Loop
21
(Blue to red according to the dirt amount)
22 AUTO Mode
23 CWT Empty
24 Brush Roller Tangled Indicator
25 Power Indicator
26 Tineco Logo
27 Self-cleaning Icon
28 Battery Level Indicator
Fig.A
ASSEMBLY
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer
to "Operation" and "Maintenance".
• To assemble the handle, insert it into the
appliance until you hear a click.
Fig.B-1
• In the event that the handle needs to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
Tips:
WiFi/Mute/Language Switch Button
• Press to turn on/off the voice prompt.
• Press twice to switch languages. (More voice
languages will be added, please refer to the
actual product for now.)
*Only available in selected models.
• Hold for 3 seconds to connect to network.
Fig.B-2
OPERATION
Preparing for Use
• Before first use, please charge the appliance
for 4-5 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press the button and the appliance will start
in AUTO mode by default. Press it again to
turn off the appliance. Switch between AUTO,
MAX and SUCTION modes by pressing the
button.
Fig.C-1
Tips (SUCTION mode not available):
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by default.
Power on while the appliance is upright, long-
press for 3s to switch between the two
modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
2.The appliance will stop working when put
upright and start running again when reclined.
* Do not recline more than 142° to avoid water
leakage.
Fig.C-2
3.Place the appliance on the charging dock
vertically after use for recharge and storage.
Fig.C-3
Note:
• Selecting the appropriate mode depending
on the CWT contents is vital for maximum dirt
detection effectiveness.
• Do not vacuum foamed liquid.
23