Seca 286 Mode D'emploi page 83

5.4 Configuring voice output (menu)
Selecting language (LAng)
Setting volume (VOL)
Activating/deactivating
announcement of measured results
In the menu you can configure voice output and the beeps if required.
*
..........
Voice Output
* Information on how to navigate in the multifunctional display menu can be
found on page 82.
You can select the language for voice output.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "LAng".
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
6. Confirm your selection.
You exit the menu automatically.
You can adjust the volume of voice output (0 = off, 100 = max.).
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "VOL".
4. Confirm your selection.
The current setting is displayed.
5. To change the setting or call up a different submenu, press the arrow key
(send/print) until the desired setting (in this case: volume "20") is dis-
played.
6. Confirm your selection.
You exit the menu automatically.
You can set the device so that the measured results (weight, height and BMI)
are announced after every measuring operation.
(reSUL)
NOTE:
If voice output is in English, the unit of measurement announced will
correspond to the setting for the multifunctional display (see "Switch-
ing unit of weight (Unit)" on page 90) and to the unit of height (see
"Switching unit of height (HUnit)" on page 90).
• DE
Language • EN (US/GB)
• ES (ES/ME)
Volume
1...100
• On
Results
• Off
• On
Print
• Off
•
Instructions
•
English
• PT
• FR • ID
• KO
• ZH
• TH • RU
On
Off
Operation • 83