Measuring Dc Current; Measuring Resistance - Amprobe AM-420 Mode D'emploi

Measuring DC Current

X�
To avoid personal injury or
damage to the meter:
1. Do not attempt to make an
in-circuit current measurement
when the open-circuit
potential to earth ground
exceeds 250V.
2. Switch to proper function and
range for your measurement.
3. Do not place the test probe in
parallel with a circuit when the
test leads are connected to the
current terminals.
4. Connect the test leads to the
circuit before powering the
circuit under test.
5. After measurement, switch the
circuit's power to OFF before
removing test leads from the
circuit.

Measuring Resistance

X�
Disconnect circuit power and
discharge all high-voltage
capacitors before testing
resistance.
7