Measuring Ac And Dc Current - Amprobe AM-500 Mode D'emploi

Measuring AC and DC Current

Press SELECT button for switching to DC current
measurement function.
X�
To avoid personal injury or damage to the Meter:
1. Do not attempt to make an in-circuit current
measurement when the open-circuit potential to
earth ground exceeding 250V.
2. Switch to proper function and range for your
measurement.
3. Do not place the test probe in parallel with a circuit
when the test leads are connected to the current
terminals.
4. Connect the test leads to the correct input A/mA μA
current terminal and to the circuit before powering
the circuit under test.
5. For current range from 8-10A, do not measure
current for more than 20 minutes. Wait for 10
minutes before taking another measurement
6. After measurement, switching OFF the circuit's
power before removing test leads from the circuit.
or
for
for
9