Measuring Continuity; Measuring Diode; Battery Test - Amprobe AM-420 Mode D'emploi

Measuring Continuity

X�
Disconnect circuit power and
discharge all high-voltage
capacitors before testing continuity.
Meter beeps at ≤10Ω, beeper turns
off at > 70 Ω.

Measuring Diode

X�
Disconnect circuit power and
discharge all high-voltage
capacitors before testing diode.

Battery Test

,
X�
Applying a voltage source or
incorrect battery type under battery
test may cause personal injury or
damage to the meter.
Battery 1.5V range is for dry battery
not exceeding 2Vdc. The resistance
load is around 50Ω.
Battery 9V range is for dry battery
not exceeding 15Vdc. The resistance
load is around 1 k.
8