PRO-POINT 9085986 Mode D'emploi page 3

V1.0
INTRODUCTION
The TIG/ARC welder is an inverter-based welding machine that incorporates the
latest in IGBT technology. The DC MMA (ARC) welding machine is capable of
delivering a smooth and incredibly stable arc, allowing easy welding with
electrodes and producing high quality welds that includes cast iron and stainless
steel.
The TIG torch allows quality DC TIG welding on steel and stainless steel. The
HF ignition system delivers a perfect arc ignition every time without any sticking
and a remarkably smooth stable arc that produces high quality TIG welds.
The welding machine incorporates a voltage reduction device to reduce the
open-circuit voltage to 7 volts.
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or
death if certain instructions are not followed.
DANGER!
WARNING!
CAUTION!
NOTICE!
Visit www.princessauto.com for more information
AC/DC Inverter TIG/Arc Welder
This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
This notice indicates a potentially hazardous situation that
may result in minor or moderate injury if proper practices are
not taken.
This notice indicates that a specific hazard or unsafe practice
will result in equipment or property damage, but not
personal injury.
9085986
3