Publicité
Les langues disponibles
Les langues disponibles
9085986
ELECTROMAGNETIC FIELDS
WARNING! Stop welding immediately and move away from the
welding machine if you feel faint, dizzy, nausea or shocks. Seek
medical attention.
Electromagnetic Fields (EMF) can interfere with electronic devices such as
pacemakers. Anyone with a pacemaker should consult with their doctor
before working with or near an arc welding machine. The following steps can
minimize the effects of electromagnetic fields.
1.
Twist or tape cables together and prevent coils.
2.
Do not drape cables on your body.
3.
Keep the welding power source and cables as far away from the user as
practical. A minimum of 24 in. is recommended.
4.
Connect the workpiece clamp as close to the weld as possible, but lay
the electrode and workpiece cables away from the user.
5.
Use the lowest current setting possible during welding.
6.
Avoid long and regular bursts of energy while welding. Apply the
electrode in short strokes and intermittently. This will prevent the
pacemaker from interpreting the signal as a rapid heartbeat.
7.
Do not allow the electrode to touch the metal while welding.
8.
Wrap the Arc lead cable and ground cable together whenever possible.
9.
Keep the Arc lead cable and ground cables on the same side of
your body.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the parts list are included.
Contents:
• Welding Machine
• Arc Lead Set
16
AC/DC Inverter TIG/Arc Welder
• Torch
• Adaptor
• Regulator
For technical questions call 1-800-665-8685
V1.0
Publicité
