PRO-POINT 9085986 Mode D'emploi page 17

V1.0
IDENTIFICATION KEY
Control Panel
A
Positive Outlet Socket – To connect the earth clamp in TIG mode or the
B
electrode holder in ARC/STICK mode.
C Negative Output Socket – To connect the TIG torch or earth clamp in
ARC/STICK mode .
D Gas Outlet – Used to connect the gas fitting/hose of the TIG torch.
E Remote Control Socket – 5-pin connector to attach a foot pedal or other
remote-control device.
Power Supply Cord – The power cord supplied with this welding machine is
F
designed to handle the maximum power required (see Specifications). Refer
to the welding machine's data plate for the Input voltage, IMAX and IEFF
requirements and ensure the power supply can meet those requirements.
Gas Inlet – The gas supply hose connects to this inlet.
G
On/Off Switch
H
Visit www.princessauto.com for more information
AC/DC Inverter TIG/Arc Welder 9085986
Fig. 1
17