ULTIMATE SPEED USLK 22 B2 Guide De Démarrage Rapide page 18

Electrical safety
Do not carry the product on
the charging cable . Pull the
type 2 plug to remove the
product from the charging
infrastructure or from the vehicle .
Protect the product from heat, oil
and sharp edges .
Do not short circuit the contacts
on the type 2 plug .
Do not insert fingers or sharp
objects into the plug contacts .
If the product is damaged,
remove the type 2 plug
immediately from the charging
infrastructure/vehicle . A
damaged product can lead to
death or serious injuries . Before
each use, check the product for
damage (e .g . cracks) . Do not
use the product if it is damaged .
m WARNING! Risk of fire
and explosion!
Never use the product
–near flammable liquids;
–near flammable gases;
–near potentially explosives
areas (e .g . paint shops)
The radio waves emitted can
cause explosions and fire .
Devices building up heat must
be separated from the product
to avoid accidental activation .
18 GB/IE
m CAUTION! Risk of burns!
The product may heat up during
operation . Do not touch the hot
surfaces .
m NOTICE! Risk of property
damage!
Before setup or first use, check
the product for any damage .
Do not use the product unless in
perfect working order .
Do not attempt to repair the
product yourself . In case of
malfunction, repairs are to
be conducted by qualified
personnel only .
Never use a damaged product .
Disconnect the product from
the charging infrastructure and
contact our customer service if it
is damaged .
˜ First set-up of the product
˜ Unpacking the product
INFO: Observe the user manual for the charging
infrastructure (charging station) and the vehicle .
1 . Take the product out of the packaging and remove all
packaging materials and plastic wrappings .
2 . Check to make sure that all listed parts are included (see
"Scope of delivery") .
3 . Check whether the product and all parts are in good
condition, if any damage or defect is detected, do not use
the product, but follow the procedure described in chapter
"Warranty" .
˜ Operation
˜ Starting the charging process
Fig . E
WARNING! Risk of electric shock! Always connect
the product to the vehicle before you connect the product to
the charging station .
m
WARNING! Do not use a cord extension set with the
product (Fig . D) .