SilverCrest SDR 1050 D1 Instructions D'utilisation Et Consignes De Sécurité page 30

NOTES:
The product takes around 3 minutes to preheat.
The product has to be unplugged
− after use,
− before cleaning, and
− before maintenance.
˜ Child safety lock
(Fig. A)
This product is equipped with a child safety lock
Child safety lock
Activate
Fully push in the
(position: )
the child safety lock
The steam trigger
no longer be pressed down.
Deactivate
Fully push in the
(position: )
the child safety lock
The steam trigger
be used again.
˜ Steaming
m WARNING! The product has to be maintained
in an upright position
− while being used,
− under pressure or
− filled with water.
Hold the product by its handle
˜ Cleaning and care
:
4 ] [
˜ Cleaning the main unit
symbol of m
.
4 ] [
can now
5 ] [
m
symbol of
.
4 ] [
can now
[ 5 ]
˜ Cleaning the accessories
.
[ 6 ]
NOTES:
Controlling the steam output: Gradually press the
steam trigger .
[ 5 ]
Stop steaming when the steam indicator
off. Wait until the steam indicator lights up again.
You may now resume with the work.
If there is no steam output, although the steam
indicator is on: Disconnect the power plug
18 ] [
from the mains socket. Refill the water tank
DANGER! Risk of electric shock! Before
cleaning and maintenance: Disconnect the power
plug from the mains socket.
7 ] [
WARNING! Do not immerse the product's
electrical components in water or other liquids.
Never hold the product under running water.
Wipe down the product with a slightly damp
cloth.
Do not let any water or other liquids enter the
product interior.
Do not use any abrasive, aggressive cleaners or
hard brushes to clean the product.
After cleaning: Let all parts dry completely.
Clean the accessories in warm, soapy water.
After cleaning: Let all accessories dry completely.
goes
18 ] [
7 ] [
.
2 ] [
GB/IE 27