Milwaukee 2970-20 Manuel De L'utilisateur page 57

2 M18™ Wireless Monitor
7. Turn the navigation dial to the System Update option, press the navigation dial to
enter the sub-menu.
8. Select Wireless Monitor and press the navigation dial. The file name of the update
should be seen in this window.
Press the navigation dial when the update file is highlighted in red to begin the update.
33kHz
MTCAM_Monitor
9. Read and acknowledge the warning message by selecting OK.
10. A progress indicator will appear showing the progress of the update.
11. A confirmation message will appear when the update is complete, and the system will
reboot.
512Hz SETTINGS
Example of a Wireless Monitor Update file
SELECTING OK WILL RUN A FIRMWARE
UPDATE ON THE WIRELESS MONITOR.
PLEASE DO NOT INTERRUPT THE
UPDATE PROCESS AFTER IT HAS STARTED.
CANCEL
THE WIRELESS MONITOR IS UPDATING...
30%
OK
53