Milwaukee 2970-20 Manuel De L'utilisateur page 38

2 M18™ Wireless Monitor
2.3.4 Adjusting the Camera Light
Entering the Camera Light menu gives access to three settings of Light Level,
Automatic Exposure and Image Enhance.
33kHz
02/22/2024 10:04:50 PM
LIGHT LEVEL
IMAGE ENHANCE
2024_02_22_A
The sub options of Light Level, Automatic Exposure and Image Enhance
1. Turn the navigation dial to Camera Ligh
Camera Light menu. Upon entering the Camera Light menu the Light Level feature will
be active and show a blue outline around the light level indicator.
2. Turn the navigation dial to reach the desired light level.
3. Press the navigation dial again to accept the light level and move on to the Automatic
Exposure option.
4. If the Automatic Exposure option is not needed, press the Back button to exit and
return to the main viewing area.
2.3.5 Automatic Exposure
Automatic exposure allows the camera to automatically adapt to changes in lighting.
Automatic exposure attempts to make the scene appear equally bright regardless of
the changes in lighting or other conditions such as reflection or the distance to objects
during the video recording. Turning off the automatic exposure locks the current camera
exposure allowing the user to adjust the lighting intensity to obtain a better picture in
extreme lighting/pipe conditions/environment. The Automatic Exposure is active (on) by
default and shown as active by the red box to the right of the level scales.
Note: The Auto Exposure feature is available in the newer HDR series camera heads. If
the Automatic Exposure box is greyed out this feature is not available.
LIGHT LEVEL
IMAGE ENHANCE
2024_02_22_A
This illustration shows the Automatic Exposure as active
512Hz CAMERA LIGHT
, press the navigation dial to enter the
34
15° 9'3''
AUTOMATIC
EXPOSURE
AUTOMATIC
EXPOSURE