Milwaukee 2970-20 Manuel De L'utilisateur page 39

2 M18™ Wireless Monitor
LIGHT LEVEL
IMAGE ENHANCE
2024_02_22_A
This illustration shows the Automatic Exposure as inactive
LIGHT LEVEL
IMAGE ENHANCE
2024_02_22_A
This illustration shows the Automatic Exposure as not available
1. Turn the navigation dial to Camera Light
Camera Light menu. Upon entering the Camera Light menu the Light Level feature will
be active and show a blue outline around the light level indicator.
2. Press the navigation dial two times to reach the Automatic Exposure box which will
turn red.
3. Press the navigation dial again to turn off the Automatic Exposure. A line will show
through the titled box.
4. Turn the navigation dial to the right to exit the Automatic Exposure setting and move to
the Image Enhance option.
5. If the Image Enhance option is not needed, press the Back button to exit and return to
the main viewing area.
2.3.6 Image Enhance
The Image Enhance feature allows the LCD display to show more detail and depth from
the camera head in different textures and colors of pipes. The Image Enhance feature
automatically adjust the LCD's display brightness and contrast settings based on the light
from the camera head.
1. Turn the navigation dial to Camera Light
2. Turn the navigation dial to reach the desired light level.
3. Press the navigation dial three times to move to Image Enhance.
4. Use the navigation dial to move the Image Enhance scale stopping on the best result.
Press the navigation dial to accept the setting.
5. Press the Back button to exit and return to the main viewing area.
, press the navigation dial to enter the
press the navigation dial.
35
AUTOMATIC
EXPOSURE
AUTOMATIC
EXPOSURE