Milwaukee 2970-20 Manuel De L'utilisateur page 20

2 M18™ Wireless Monitor
2.2.4 Setting the M18™ Wireless Monitor Language
It is recommended to set your Language first so that the other menus can be easily read
and understood.
1. Turn the Navigation Dial to Settings
2. Turn the navigation dial to Language, press to enter the Language sub-menu.
33kHz
SCREEN SETTINGS
DATE & TIME
UNITS
LANGUAGE
SYSTEM UPDATE
FACTORY RESET
ABOUT
SERVICE & SUPPORT
3. Turn the navigation dial to select the desired Language and press the navigation dial.
4. Turn the navigation dial and press on OK to start the Language change.
5. The system will reboot and start in the Language selected.
2.2.5 Setting the Date & Time
The system offers Date Formats of MM/DD/YYYY, DD/MM/YYYY and YYYY/MM/DD with
12-Hour or 24-Hour Time Formats.
1. Turn the navigation dial to Settings
2. Turn the navigation dial to Date & Time, press to enter the Date & Time sub-menu.
3. Turn the navigation dial to Date Format, press the navigation dial. Use the navigation
dial to select the desired Date Format and press the navigation dial to accept. Repeat
the same steps selecting the Date Format.
, press the navigation dial.
512Hz SETTINGS
THE WIRELESS MONITOR LANGUAGE HAS
BEEN CHANGED. THESE CHANGES WILL
TAKE EFFECT ONLY AFTER THE UNIT HAS
BEEN RESTARTED.
CANCEL
, press the navigation dial.
16
ENGLISH
OK
FEET