Milwaukee 2970-20 Manuel De L'utilisateur page 56

2 M18™ Wireless Monitor
4. Read and acknowledge the factory reset message by selecting OK.
The factory reset is now complete, and the system is returned to the Factory Reset sub-
menu.
2.4.2 Firmware Updates – M18™ Wireless Monitor
Firmware updates are periodically released to introduce new features and optimizations.
Before updating a system, go to the About section (found at the bottom of the Settings
menu) of the Settings menu and make a note of the current firmware revisions in the
system.
33kHz
SERIAL NUMBER
WIRELESS MONITOR
CONTROL HUB
FIRMWARE VERSION
WIRELESS MONITOR
CONTROL HUB
CONTROL HUB INTERNAL DRIVE
0.25GB USED OF 465.54GB
REEL TYPE
100' FLEXIBLE
System information is shown in the About screen
Firmware updates are found at www.milwaukeetool.com.
1. Go to the Milwaukee
AND DOWNLOADS.
2. Enter the CATALOG NUMBER, which can be found on the front cover of this manual,
in the search box.
3. Select SOFTWARE DOWNLOAD and then click on GO.
4. Drag the downloaded firmware update file onto a USB thumb drive or right mouse click
and select copy, then paste the firmware update file to a USB thumb drive.
5. Insert the USB stick containing the firmware update into the M18™ Wireless Monitor's
USB-A port.
6. Turn the navigation dial to Settings
DO YOU WANT TO FACTORY RESET THE
WIRELESS MONITOR?
CANCEL
512Hz ABOUT
®
website and click the SUPPORT link, then click on MANUALS
, press the navigation dial.
52
OK
1029384756
L02AB215100002F
1.5.0.63
1.5.0.63