Milwaukee 2970-20 Manuel De L'utilisateur page 35

2 M18™ Wireless Monitor
4. When a recording video is paused the pause symbol will appear center screen, a
Resume icon will show on the bottom left corner and the blinking recording icon in the
upper left corner of the screen will change to a blinking pause icon.
02:59
02/22/2024 10:04:50 PM
2024_02_22_A
5. Press the Picture
moment confirming that the image was captured.
At the end of the session press the Record
file.
Image Files – images can be captured while recording or viewing raw video from the
camera. The image will be saved in the same Job folder as the video.
When the Picture
on the screen. If the picture is in Zoom, Pan or Screen Rotate modes the captured picture
will appear as such.
2.3.3 Export Job
The Export Job allows for the copying of files from the M18™ 500GB Control Hub Internal
Drive to the Control Hub Thumb Drive.
From within the Gallery
time.
From the Manage Jobs option, under Settings
session.
Export a Job from the Gallery
1. From the Gallery
2. Use the navigation dial to select Export
3. Use the navigation dial to select the export destination of Control Hub Thumb Drive,
press the navigation dial. The progress indicator will appear showing the status.
button to capture an image. The screen will flash red for a
button is pressed, the image is captured exactly as it is viewed
individual or multiple files or Jobs can be exported one at a
select the desired video or image.
31
button again to end and save the video
entire Jobs can be exported in one
, press the dial.
15° 9'3''